|
|
Frequently Asked Questions
| Q. What types of data are accepted? |
| A. Gerber Data or a physical PCB sample.
Please include the following in your Gerber data package:
Dimensioned Fabrication Drawing
Assembly Drawing
Top and Bottom Silkscreens
Bottom Soldermask
Bottom Solderpaste
Aperture List (If RS274-X Gerber data is submitted, this file is not necessary since the aperture list in this type of Gerber data is embedded)
Readme File
Image files (such as JPEG, TIFF, BMP, PDX etc.) are useful for viewing PCBs, but not for programming
DMI will accept a physical PCB for designing a pallet. In this instance, a solder test board (with a component list for the heights of each component) can be sent to DMI for pallet design. However, the plated through holes which are to be exposed to the wave needs to be marked. This method will take additional time and will incure a small set up charge.
|
|
If you do not see an answer to the question you have, please contact our staff. We often add questions that are recieved via e-mail to the FAQ to help others.
| Q. How should I send my data files? |
| A. Just zip your data together, using PKZip, WinZip, or any other ".zip" format compressor. Zipped files maintain their integrity over the Internet and take less time to upload/download.
Once zipped, e-mail the file to: data@dmipallet.com. Be sure to include any pertinent information in the body of the e-mail as well. You should receive a confirmation e-mail verifying that your files have been received intact. From this point, drawings and e-mail messages are forwarded to the Sales Department for quotation. Further communications will need to be addressed to sales@dmipallet.com. |
|
If you do not see an answer to the question you have, please contact our staff. We often add questions that are recieved via e-mail to the FAQ to help others.
| Q. Can DMI make pallets for flex circuit boards for SMT and screen print processing? |
| A. DMI has extensive experience with flex circuits and can make both SMT and screen print pallets. Please call for a quote. |
|
If you do not see an answer to the question you have, please contact our staff. We often add questions that are recieved via e-mail to the FAQ to help others.
| Q. Can DMI help with assembly fixtures for boxes, mechanical assemblies or components? |
| A. DMI can build any kind of fixture, assembly aid, or part which helps with component assembly. DMI specializes in plastic machining, aluminum, or stainless steel machining. Simply send in a drawing for a quote. |
|
If you do not see an answer to the question you have, please contact our staff. We often add questions that are recieved via e-mail to the FAQ to help others.
| Q. Can DMI build pallets with titanium or stainless steel? |
| A. Yes DMI will use stainless steel or titanium for tight pocket applications, or, masking where applications demand an inert to solder metal. DMI always offers our customers the latest in technology while keeping costs down. For this reason, metal (titanium and/or stainless steel) is sparingly used on the pallets, aiding in keeping the cost to our customers low. |
|
If you do not see an answer to the question you have, please contact our staff. We often add questions that are recieved via e-mail to the FAQ to help others.
| Q. Does DMI build products other than pallets? |
| A. Yes, DMI offers Stainless Steel Wash Baskets, Assembly Fixtures, Shelving for pallets or PCBs, and Customer Specified Machined Items. DMI is a machine shop that can work on most all metals and especially plastics. DMI has extensive knowledge and expertise in the area of plastics machining. Please call if you have any questions and/or ask us for a no-obligation quote - we would sincerely appreciate the opportunity to work with you. |
|
If you do not see an answer to the question you have, please contact our staff. We often add questions that are recieved via e-mail to the FAQ to help others.
Products | Services | Innovations | Materials | Company | Contact | Client Login
|
